Filter
Top Products
Control Tab
Audio Settings Page
The Audio Settings page provides a way to set the input audio gain and attenuation,
output volume, and mix-point adjustments including level control, and mute or unmute.
Access the Audio Settings page by clicking the Audio Settings link on the control page
(see figure 71).
Figure 71. Video and Audio Settings Page
Change the Input Gain and Attenuation
Users can set the level of audio gain or attenuation (–18dB to +80dB) for each input from
the audio settings page. Audio levels can be adjusted so there are no noticeable volume
differences between sources.
Change an input audio level setting as follows:
1. Next to the desired input number, click the input level drop-down box. A drop-down
scroll box appears (right).
2. Click and drag the slider or click the scroll up button or scroll down
button until the desired audio level is visible.
Alternately the + and - boxes increment the level up or down one step.
3. Click the desired gain or attenuation value. The range is –18 to +80dBu.
4. Repeat steps 1 through 3 for each input.
DMP64 • HTML Operation 132