Filter
Top Products
Pre-mixer Gain (GAIN)
The post-input processing gain control (also called the pre-mixer
gain) provides gain or attenuation post-processing gain block. It
includes a mono long-throw fader with a – 100.0 to +12.0dB gain
range, and a current level setting readout below the fader. Fader
adjustments are in 1dB increments, while adjustments can be
entered manually to 0.1dB resolution.
Default is unmuted at unity (0.0dB) gain.
Selecting the fader handle with the mouse or clicking within the fader
area brings focus to the fader. The input signal level can be adjusted
using any of the following methods:
• Select and hold the fader handle, then drag it to desired level in
1.0dB steps.
• Select or tab to the fader handle, then use the up/down arrow to
set the desired level in 1dB steps.
<Page Up> and <Page Down> increases and decreases level in 5dB steps.
Click in or tab to the level readout field. Type a new value, then press <Enter> or <Tab> to
another area. .
DMP64 • Software Control 55