Filter
Top Products
42
MR-8 Owner’s Manual
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Bouncing tracks
The track bounce function of the MR-8 allows you to mix several tracks and record onto two
other tracks. Two modes of track bounce are available: bouncing tracks 1 through 4 to
tracks 5/6 ("1-4 > 5/6" mode), and bouncing tracks 1 through 6 to tracks 7/8 ("1-6 > 7/8"
mode). In either mode, you can apply a reverb (or delay) and control panning for tracks 1
through 4 when bouncing to two tracks in stereo.
Furthermore, you can apply the mastering effect to the mixed signals. By deleting the
original track data after track bouncing, you can record new materials onto these tracks. See
the following for details.
<Example of track bouncing>
You can record more than eight materials using the track bounce function as shown in the follow-
ing example.
<Step 1>
Make recordings to tracks 1 through 6.
<Step 2>
Bounce tracks 1 through 6 to tracks 7/8.
<Step 3>
Delete tracks 1 through 6.
<Step 4>
Overdub new materials to
tracks 1 through 4.
<Step 5>
Bounce tracks 1 through 4 to
tracks 5/6.
<Step 6>
Delete tracks 1 through 4.
<Step 7>
Overdub new materials to
tracks 1 through 4.
<Tip>
In this step, you can make
bouncing while listening to
tracks 7/8 as well (see page 46).
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Mixing
Track 4
Track 3
Track 2
Track 1
Track 5
Track 6
Track 7
Track 8
Mixing