Filter
Top Products
66
MR-8 Owner’s Manual
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
ABS ZERO REC END
<Note>
If a destination track has recorded data,
moving data overwrites the previous data.
9) Press the [ENTER] key.
The display returns show to the screen in which
"Move Track" is highlighted.
10) Press the [MENU] key to exit the menu mode.
<Note>
If you are not satisfied with the result, press
the [UNDO/REDO] key to undo the opera-
tion (see page 62).
Exchange whole track data
You can exchange whole data (from ABS ZERO to
REC END) between the desired mono or stereo
track(s).
<Note>
You cannot exchange track data of a song pro-
tected. Release the protection before exchang-
ing track data.
1) Load the song you want to edit.
2) While the recorder is stopped, press the [MENU]
key to enter the menu mode.
The display shows the menu selection screen, in
which "System" is highlighted initially.
3) Use the [CURSOR ] key to highlight "Track", then
press the [ENTER] key.
4) Use the [CURSOR
] key to highlight "Change
Track", then press the [ENTER] key.
The display now shows the screen for selecting the
source track(s) and destination track(s) of the
exchange operation.
The display now shows the track edit menu selec-
tion screen, in which "Erase Track" is highlighted ini-
tially.