Filter
Top Products
83
MR-8 Owner’s Manual
2) Use the [CURSOR ] key to highlight
"---bar - -> ---bpm", then press the [ENTER] key.
The display shows the screen for new tempo
setting. Initially, the upper "2" for bar number
entry flashes. You can enter a numeric value
between 1 and 999.
3) Use the [CURSOR / ] keys to enter "4".
4) Use the [CURSOR
] key to flash "1" for "Beat"
setting.
You can enter a beat number between 1 and 8.
5) Use the [CURSOR / ] keys to enter "2".
6) Use the [CURSOR
] key to flash "120" for "Tempo"
setting.
You can enter a tempo value between 30 and 250.
7) Use the [CURSOR / ] keys to enter "180".
8) Use the [CURSOR ] key to highlight "[ENTER]" at
the lower center of the screen, then press the
[ENTER] key.
The tempo setting above is completed and the
display changes to show the tempo map screen, in
which the new setting is reflected.
If you want to cancel the setting, highlight
"[CANCEL]" instead of "[ENTER]", then press the
[ENTER] key.
9) Use the [CURSOR ] key to highlight
"---bar - -> ---bpm", then press the [ENTER] key.
The display shows the screen for new tempo
setting as shown in step 2 above. Follow the same
procedure as described above until you finish all
settings.
10) After completing all settings, use the [CURSOR ]
key to return the display to show the menu
selection screen.
Then, in order to use the rhythm guide function,
continue to the procedure for click level setting
described on page 85.
To edit the tempo map you created, see below.
flashing
flashing
flashing
flashing
flashing
flashing