Filter
Top Products
94
MR-8 Owner’s Manual
Troubles for power supply
<Trouble 1>
The MR-8 suddenly turned off the power.
• Are the plugs of the AC adaptor plugged in
firmly?
Check the connection of the AC adaptor with
the MR-8 and AC main outlet (see page 17).
• Are the batteries empty? (when supplying the
power from batteries)
Check the batteries (see page 17).
Other troubles
<Trouble 1>
Cannot hear the rhythm guide click, though
the signature/tempo map is set.
• Is the "Click level" item in the menu mode set
correctly?
By default, this item is set to "Off" and no
rhythm guide click is output.
Set it appropriately (see page 85).
<Trouble 3>
Pressing the [PLAY] key while holding down
the [STOP] key cannot execute the loop play-
back function.
• Are the LOCATE A and LOCATE B points set
correctly?
By default, both of these points are set to
the beginning of a song (i.e. "0m00.000s"
or "-2bar 1
00clk"). In this condition, you
cannot carry out the loop playback
function.
Also, if the LOCATE B point is earlier than
the LOCATE A point, you cannot carry out
the loop playback function (see page 53).
Troubles for effect
<Trouble 1>
Cannot apply the effect.
• Are the [EFFECT SEND] control for the track you
want to apply the effect and track fader brought
up appropriately?
EFFECT
SEND
0
10
0
10
0
10
0
10
The [EFFECT SEND] control for the track you
want to apply the effect have to be brought
up, otherwise, the track signal is not sent to
the internal digital effector (see page 40).
Also, the track fader have to be brought up.
Troubles for USB connection
<Trouble 1>
Cannot export a WAV file to a personal com-
puter.
• Is the USB cable connected correctly?
Check the connection, as well as the USB
cable (see page 88).
• Is the personal computer meets the
requirement?
Only Windows Me/2000/XP machines can
be used with the MR-8 (see page 88).