Filter
Top Products
61
MR-8 Owner’s Manual
Deleting the unnecessary file in a song
Each song has two WAV file: one for track data,
while the other for undo/redo operation. The
latter file is called "undo WAV file" and allows
undo/redo operation. Executing undo operation
consumes the space of the card. Therefore, the
more often you execute undo/redo, the remain-
ing space becomes smaller.
If you decide not to use the undo function in the
recording process, you can delete only the undo
WAV file which is not necessary now.
By deleting the undo WAV file, you can increase
the remaining (recordable) space of a song.
<Notes>
• You cannot delete the undo WAV file of a song
which is protected. To delete the undo WAV
file of such a song, release the protection
before deleting the undo WAV file.
• Note that you cannot undo deleting the undo
WAV file.
• By deleting the undo WAV file, you can never
execute the undo/redo function for the
previous recording/editing.
When you make recording/editing after
deleting the undo WAV file, a new undo WAV
file is created. You can undo/redo recording/
editing made after deleting the undo WAV file.
1) Load the song of which you want to delete the undo
WAV file.
2) While the recorder is stopped, press the [MENU]
key to enter the menu mode.
The display shows the menu selection screen, in
which "System" is highlighted initially.
3) Use the [CURSOR ] key to highlight "Song", then
press the [ENTER] key.
The display now shows the song edit menu
selection screen, in which "Select Song" is
highlighted initially.
4) Use the [CURSOR ] key to highlight
"Delete Unused", then press the [ENTER] key.
The display now shows the confirmation screen for
deleting the unused (undo WAV) file.
In this screen, “DEL Unused” and “Can’t Undo!” are
shown for warning, as well as “Yes-> RECORD+YES”
and “No-> NO Key” alternately flash.The MR-8 asks
for confirmation because you cannot undo
deleting the undo WAV file.
<Note>
To cancel deleting the file, press the [CURSOR
] key.
5) Press the [CURSOR ] key while holding down the
[RECORD] key.
The file is deleted, and "Completed!" is shown on
the display.
6) Press the [ENTER] key.
The display returns to show the screen in which
"Delete Unused" is highlighted.
7) Press the [MENU] key to exit the menu mode.