Filter
Top Products
73
MR-8 Owner’s Manual
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
LOCATE B
point
10) Press the [ENTER] key.
The display returns show to the screen in which
"Copy-Paste Part" is highlighted.
11) Press the [MENU] key to exit the menu mode.
<Note>
If you are not satisfied with the result, press
the [UNDO/REDO] key to undo the opera-
tion (see page 68).
You can move the desired part of the desired
mono or stereo track(s) to the other desired
track(s). After the part is moved, the original part
on the source track(s) becomes silent.
<Note>
You cannot move data of a song protected.
Release the protection before moving data.
1) Load the song you want to edit.
2) Store the LOCATE A and LOCATE B points (see
page 53).
You can check the part by playing back between
the LOCATE A and LOCATE B points (see page 68).
3) While the recorder is stopped, press the [MENU]
key to enter the menu mode.
The display shows the menu selection screen, in
which "System" is highlighted initially.
4) Use the [CURSOR ] key to highlight "Part", then
press the [ENTER] key.
The display now shows the part edit menu selec-
tion screen, in which "Erase Part" is highlighted ini-
tially.
Moving the desired part to the other track(s)