Filter
Top Products
85
MR-8 Owner’s Manual
Setting the click level
After creating the signature/tempo map, set the
click level finally. In the initial condition, the click
is not output (the click level is set to "Off").
Therefore, to use the rhythm guide function, you
have to set to output the click at the desired level.
1) In the menu selection screen, use the [CURSOR ]
key to highlight "System", then press the [ENTER]
key.
The display now shows the system menu screen, in
which "Card Format" is highlighted.
2) Use the [CURSOR ] key to highlight "Click Level",
then press the [ENTER] key.
The current click level flashes (it is set to "Off" by
default).
You can select the click level from among levels 1
through 10 and Off (default). Selecting larger level
number outputs the louder rhythm guide click.
4) To exit the menu mode, press the [MENU] key.
As described above, you can hear the rhythm guide
click by setting the signature/tempo map and click
level.
The click is output via the stereo buss (L, R), and
you can play back or record while listening to the
rhythm guide.
<Note>
When mixing down tracks or recording the
mixed stereo signals to an external master
recorder, set the "Click Level" to "Off".
Otherwise, the click is also output from the
[STEREO OUT (L, R)] jacks together with the
mixdown signals.
3) Use the [CURSOR / ] keys to select a desired
click level, then press the [ENTER] key.
flashing