Filter
Top Products
60
MR-8 Owner’s Manual
flashing
Protecting a song
You can protect a song to prevent an accidental
erasure. The protection can be released when-
ever you want.
To keep a recorded song, we recommend to pro-
tect it.
<Note>
You cannot make recording or editing to a pro-
tected song. If you want to make recording or
editing to a protected song, you must release
the protection first.
1) Load the song you want to protect.
2) While the recorder is stopped, press the [MENU]
key to enter the menu mode.
The display shows the menu selection screen, in
which "System" is highlighted initially.
3) Use the [CURSOR ] key to highlight "Song", then
press the [ENTER] key.
The display now shows the song edit menu
selection screen, in which "Select Song" is
highlighted initially.
4) Use the [CURSOR ] key to highlight "Protect",
then press the [ENTER] key.
The current option ("On" or "Off") flashes.
The default option is "Off".
5) Use the [CURSOR / ] keys to select "On", and
press the [ENTER] key.
The current song is now protected. You cannot make
any recording or editing with the song.
To release the protection, carry out the same
procedure above but select "Off" in step 5.
6) Press the [MENU] key to exit the menu mode.
<Tips>
When the protected song is loaded, “ ” is
shown in the upper right corner of the home
screen (indicated by the arrow below).
When this icon is shown, you cannot make
recording or edit the song.