Filter
Top Products
ALLEN&HEATH iLive Reference Guide AP6526 iss.3 107
A
B
DC
ABCDE
F
GHI J
A1-E8 = I/P 1-40
FOH INPUTS
FOH_8fx_LRLoad Show
8x GRP = 4m 2st
18x AUX = 8m 1st 8FX
MAIN = LR
8x MTX = 4m 2st
CONFIG
APPLICATION EXAMPLE - FOH / MONITOR (Digital mic splitter. No ESA at Monitor)
48 inputs FOH, 40 way split. One engineer has gain control affecting both.
ETHERNET
CAT5
ETHERSOUND
CAT5
ESA IN
NETWORK
HEADPHONES and TALKBACK
2 x CAT5 cables to stage
FOH
iDR10
ESA OUT
NETWORK
AUDIO CLOCK = INTERNAL
ESB CONFIG = MASTER
CH SOURCE = LOCAL INPUTS
I1-2 = ST AUX1
I3-4 = -
I5-8 = MAIN1-4
J1-4 = MTX1-4
J5-6 = ST MTX1-2
FOH OUTPUTS
C1-2 = AUX7-8
C3-4 = ST AUX1
A1-8 = CH 57-64
FOH LOCAL AUDIO
C5-8 = MAIN
D1-4 = MTX1-4
D5-8 = ST MTX1-2
FOH engineer has control of preamp gain and phantom power
ESB OUT
(MASTER)
FOH gain affects monitors but engineer has digital channel trims
ESB IN
AUDIO CLOCK = ESB
ESB CONFIG = MASTER/SLAVE
CH SOURCE = ESB
4
iLive
G1-8 = AUX1-8
H1-8 = ST AUX1-4
I1-8 = ST AUX5-8
J1-4 = MTX1-4
J5-6 = ST MTX1
J7-8 = PAFL OUT
A
B
DC
ABCDE
F
GHI J
F1-F8 = I/P 41-48
LOCAL INPUTS MONITOR SENDS
Load Show
SLAVE_MON_8m8st
MONITORS
ETHERNET
CAT5 CAT5
< DIGTAL MIC SPLITTER
iDR10
NETWORK
TALKBACK OUT (audio)
XLR CABLES
PAFL IN
LOCAL MON OUT
HEADPHONES / IEM
No ESA fitted. No audio in surface because the rack is local.
Surface PAFL monitor and TALKBACK use analogue connections to the rack.
(SLAVE)
TB uses INPUT 48
ALLEN&HEATH iDR-64
MIX ENGINE
ALLEN&HEATH iDR-64
MIX ENGINE
This is similar to Application 3 but has no audio
fitted to the Monitor Surface and uses analogue
connections for its PAFL and talkback. ESA is
not needed for the Monitor system. The audio
connections are in the MixRack located nearby.