Filter
Top Products
ALLEN&HEATH iLive Reference Guide AP6526 iss.3 41
Front Panel view – Work with the FX parameters
Access FX parameters from the strips Press an FX send master
strip SEL key, or press an FX short return (IP FX) strip SEL key to open up the
FX screen. You can adjust the parameters (Front Panel view), configure the
routing (Back Panel view) and work with libraries.
Access FX parameters from the TouchScreen Press the FX key
below the TouchScreen to open up the FX page. Touch one of the 8
numbered boxes across the top to present the FX processor you want to work
with. These display FX number, type and user defined name. If the box is
blank and labelled as “Empty Rack” then this means an FX processor has not
been assigned to this slot. Open up the Library and recall a preset to load the
required processor.
Access the FX send mix from the strips Press an FX send master
strip MIX key to work with the fader (or encoder) view of all the channel sends
feeding that effect, or press an input channel strip MIX key to work with the
sends from that channel to all the mixes.
Access the FX send mix from the TouchScreen With the screen
in the ROUTING page, press any IP channel, FX return or FX master SEL key
and select the FX tab to view the related send settings. Touch the screen
controls and use the screen encoder to adjust the levels.
FX send and return master screen The lower part of the screen
displays the current settings of the FX send and return masters, or Wet/Dry
and Bypass controls if the FX is Inserted. You can also access the PEQ as a
popup here. This lets you adjust the master settings from the screen whilst
working with the FX parameters.
FX return PEQ and processing
The FX ‘short’ return channel (addition to the 64 input channels) adds a 4-band
PEQ which is accessible on the rotary controls in the channel processing block
or a popup in the screen. If you have configured the effect to return through a
full channel (part of the 64 channels) then you get all the processing normally
associated with an input channel.
Access FX
sends
Access FX
parameters
Select FX
rack slot
Adjust
parameters
Highlight and
scroll through
effects presets
using encoder
Library of
FX presets
FX send and
return master
settings
MUTE
SEL
MIXMIX
PAFL