Filter
Top Products
ALLEN&HEATH iLive Reference Guide AP6526 iss.3 109
6
iLive
FOH gain affects monitors but engineer has digital channel trims
ALLEN&HEATH iDR-64
MIX ENGINE
ABCDE
F
GHI J
D1-4 = MTX1-4
D5-8 = ST MTX1-2
A1-8 = CH 57-64
FOH LOCAL AUDIO
I1-2 = ST AUX 1
I3-4 = -
I5-8 = MAIN1-4
J1-4 = MTX1-4
J5-8 = ST MTX1-2
A1-G8 = I/P 1-56
STAGE INPUTS FOH PA SENDS
B1-8 = AUX1-8
C1-8 = ST AUX1-4
D1-8 = ST AUX5-8
A1-8 = CH57-64
MONITOR AUDIO
Load Show
FOH_8fx_LRLoad Show
SLAVE_MON_8m8st
26x AUX = 8m 2st 2FX
CONFIG
8x GRP = 4m 2st
18x AUX = 8m 1st 8FX
MAIN = LR
8x MTX = 4m 2st
CONFIG
APPLICATION EXAMPLE - FOH / MONITOR (iDR0 at Monitors)
64 inputs FOH, 56 way split. FOH engineer has gain control.
ETHERNET
CAT5
ETHERSOUND
CAT5
ESA IN
NETWORK
HEADPHONES and TALKBACK
FOH engineer has control of preamp gain and phantom power
2 x CAT5 cables to stage
FOH
MONITORS
CAT5 CAT5
< MIC SPLITTER (MIXRACK I/P 1-56)
NETWORK
ENGINEER'S WEDGE
HEADPHONES / IEM
ESA IN
iDR10(MASTER)
iDR0 (SLAVE)
ESB OUT
ESA OUT
NETWORK
AUDIO CLOCK = INTERNAL
ESB CONFIG = MASTER
CH SOURCE = LOCAL INPUTS
AUDIO CLOCK = ESB
ESB CONFIG = MASTER/SLAVE
CH SOURCE = GLOBAL ESB INPUT
Set options using TOUCHSCREEN = MIXRACK / Mixer Pref / Audio Sync Networks
A
B
DC
A
B
DC
This dual system FOH/Monitor application uses
the compact iDR0 as the Monitor mix engine
and presents the Monitor audio at the rear of its
Surface. The FOH engineer has control of the
preamp gain and phantom power. The Monitor
engineer can compensate using a digital trim.