Filter
Top Products
ALLEN&HEATH iLive Reference Guide AP6526 iss.3 9
MIC/LINE IN module
8x mic preamps with remote
gain control.
DUAL MIC/LINE IN module
Connect 16x inputs on screw
terminal plugs. 8x mic
preamps each with remote
selection of A and B inputs.
DIGITAL IN module
4x pairs of digital inputs selectable
either AES, SPDIF or OPTO.
DIGITAL OUT module
4x pairs of digital outputs simultaneously
available AES, SPDIF or OPTO.
MULTI DIGITAL OUT module
16x outputs in digital format. ADAT, Aviom,
Hearback, iDR Expander. Uses 2 slots.
DSP ‘RackExtra’ module
The DSP mix engine, the heart
of the iLive mixing system.
64x32 mix architecture plus 8x
internal effects.
REMOTE AUDIO module
With system clock, headphones
and remote audio distribution. Fit
up to 2 audio network option
cards. EtherSound interface is
available here.
CPU module
Manages the MixRack
system and allows remote
control via Ethernet, MIDI
and PL-Anet. Also provides
a lamp socket.
LINE OUT module
8x balanced line out sockets.
Audio modules
10 slots available.
Slots A to J
System
modules
Slots K, L, M
iDR10
MixRack
Ethernet switch
3x network ports.
ESA
EtherSound digital
snake. Surface
and break out/in
audio.
ESB
EtherSound digital
mic split, system
expansion, record.
PL-Anet
Connect to Allen &
Heath PL-Series
remote controllers.
POWER SUPPLY module
Universal mains input. One
required. Fit second as redundant
supply backup.
Note: You can choose any combination of input, output and blank
modules to load into the 10 available slots. The format above shows all
the options available at the time of print and is not representative of a
typical user setup. The photo below shows a popular configuration with
48 mic inputs and 24 line outputs loaded. Further inputs and outputs
would typically be available at the rear of the surface.
Module extractor tool
To pull out modules if you need
to reconfigure the module
format.
Note: Do not remove or plug
in modules while power is
applied. The iLive system is not
‘hot pluggable’.
FLIGHT CASE
Touring grade case on
wheels. Shock mounted
rack. Front and rear
covers.
CHK indicators
Follow PAFL
selection
PP indicators
Detect phantom
power voltage
on XLR sockets.
MUTE indicators
Display output
mute status.