Filter
Top Products
110 ALLEN&HEATH iLive Reference Guide AP6526 iss.3
7
iLive
Monitor gain affects FOH but engineer has channel digital trims
Monitor engineer has control of preamp gain and phantom power
ALLEN&HEATH
iDR-64
MIX ENGINE
ABCDE
F
GHI J
C1-2 = AUX7-8
C3-4 = ST AUX1
C5-8 = MAIN1-4
D1-4 = MTX1-4
D5-8 = ST MTX1-2
A1-8 = CH 57-64
A1-G8 = I/P 1-56
B1-8 = AUX1-8
C1-8 = ST AUX1-4
D1-8 = ST AUX5-8
A1-4 = MTX1-4
A5-8 = ST MTX1-2
FOH AUDIO
MONITOR OUTPUTS
STAGE INPUTS
Load Show
Load Show
MON_2fx_8m8st
8x GRP = 4m 2st
18x AUX = 8m 1st 8FX
MAIN = LR
8x MTX = 4m 2st
CONFIG
26x AUX = 8m 2st 2FX
8x MTX = 4m 2st
CONFIG
APPLICATION EXAMPLE - FOH / MONITOR (iDR0 at FOH)
64 inputs FOH, 56 way split. Monitor engineer has gain control.
SLAVE_FOH_LR
AUDIO CLOCK = ESB
ESB CONFIG = MASTER/SLAVE
CH SOURCE = GLOBAL ESB INPUT
ESA OUT
ESB IN
ETHERNET
CAT5
ETHERSOUND
CAT5
ESA IN
NETWORK
iDR0
HEADPHONES and TALKBACK
Set options using TOUCHSCREEN = MIXRACK / Mixer Pref / Audio Sync Networks
Single CAT5 EtherSound cable to stage (no Ethernet connection)
(SLAVE)
ETHERNET
CAT5
ETHERSOUND
CAT5
ESB OUT
MIC SPLITTER (MIXRACK I/P 1-56) >
iDR10
NETWORK
ENGINEER'S WEDGE
HEADPHONES / IEM
(MASTER)
AUDIO CLOCK = INTERNAL
ESB CONFIG = MASTER
CH SOURCE = LOCAL INPUTS
ETHERSOUND
CAT5
ESA IN
FOH
MONITORS
ESA OUT
A
B
DC
A
B
DC
This application has the iDR0 at FOH with the Monitor engineer taking control of the
preamp gain and phantom power. It uses just one CAT5 cable to connect between
FOH and stage. FOH audio is at the rear of its Surface.