Filter
Top Products
32 ALLEN&HEATH iLive Reference Guide AP6526 iss.3
Using the Channel MIX key - View all sends from one channel.
1. Press MIX on an input channel strip. View the current sends and
assignments from that channel on the master strip LCDs and
faders/rotaries.
2. To assign to individual groups or sends, hold down the ASSIGN key
and then press master MIX keys to toggle them on or off. The master
strip LCDs display an ‘ON’ icon when the channel is assigned to it.
There is no ‘assign to all’ function.
3. To set individual sends pre or post-fade, hold down the PRE/POST
key and then press the related master SEL keys to toggle them pre or
post. The strip LCDs display a ‘PRE’ icon when set to pre-fade.
4. For aux, FX and matrix mixes, the faders or rotaries become the
sends depending on the setting of the ‘Send on Rotaries’ button in
the ROUTING screen with master strip SEL active. If a rotary send,
then they remain as master faders. For groups and DCAs (no send
levels), the faders and encoders remain unaffected.
5. For stereo aux and matrix sends, the rotaries become the PAN
controls. If a stereo send is configured for rotary levels then the
second (PAN) function as accessed by holding down the ROTARY
SHIFT key while turning the encoder. In this case the strip LCD
displays two dials.
SEL
MIXMIX
1
IP
PAN
LR
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
WDG1
AUX
PRE
WDG2
AUX
ASSIGN
PRE/POST FADE
ASSIGN
PRE/POST FADE
ROTARY SHIFT
PRE
IEM1
AUX
STEREO
PRE
IEM2
AUX
STEREO
PRE
FADER
CH
AUX
PRE
PAN
LR
LEV
FADER
CH
IEM1
AUX
STEREO
PAN
LR
PAN
LR
AUX
PRE
PAN
LR
LEV
IEM1
AUX
STEREO
Current mix
status
The channel is
assigned to this mix
The channel send to
this mix is set pre-fade
Fader mix
Send levels on faders. Pan on
rotaries if stereo mix.
Rotary mix
Send levels on rotaries. Pan on
shifted rotaries if stereo mix.
1
3
2
4
5
Select mi
x
Assign to mixes
Set Pre/Post fade
Adjust send levels
Adjust stereo pan