Filter
Top Products
100
Troubleshooting
Appendices
Tones Are Al-
tered
Did you call up a Setup?
• When a Setup is called up, the cur-
rent Tone, effect, and other settings
are disabled, and the selected Set-
up goes into effect (p. 54). Resave
required settings to a Setup (p. 56).
Did you press ONE TOUCH [PI-
ANO]?
• When ONE TOUCH [PIANO] is
pressed, the current Tone, effect,
and other settings are disabled,
and settings for use in piano per-
formances go into effect (p. 35). Re-
save required settings to a Setup
(p. 56).
Is the Tone Control function assigned
to the [CONTROL] knob?
• Check the Control/EQ Control set-
tings in Edit mode (p. 74).
When UPPER
Tone is Select-
ed, LOWER
Changes to
Same Tone
Are the UPPER Part and the LOWER
Part set to the same value in the Local
Part Param Part Assign settings in
Edit mode (p. 89)?
Tone Doesn’t
Change/Key-
board Not
Switching to
Split or Layer
Is [MIDI TX] set to ON?
• When [MIDI TX] is set to ON, the
external sound generator is con-
trolled. To change the RD-700’s
Tones and make settings in Key-
board mode, set [MIDI TX] to OFF
(p. 59).
Is the PART SELECT button for the
Part containing the Tone you want to
change set to ON (p. 44)?
Is [NUM LOCK] on?
• Tone categories cannot be selected
with the TONE SELECT buttons
when [NUM LOCK] is on.
Tone Doesn’t
Change When a
TONE SELECT
Button is
Pressed
Could you have the Tone Wheel
screen appearing in the display?
(p. 75)
• In the Tone Wheel screen, pressing
a TONE SELECT button selects
one of the Tone Wheels from 1
through 10.
Rhythm Not
Sounding
Set the Part 10 Receive Channel set-
ting in Internal Part Prm in Edit
mode to 10 (p. 90).
Problem
Check/Solution
Rhythm Not
Sounding
Has the System Clock Source setting
in Edit mode been set to MIDI (p. 70)?
Do you have an external MIDI device
connected?
• You cannot set the tempo with the
RD-700 when Clock Source is set to
MIDI. Accordingly, if no external
MIDI device is connected, then no
tempo setting is made for the
Rhythm, and so the Rhythm does
not sound.
Is the MIDI TX screen (p. 59) active?
• Rhythms do not play when the
MIDI TX screen appears in the dis-
play. Press [MIDI TX] so that the
button’s indicator light goes off.
In Edit mode, is the Rhythm Pattern’s
Pattern setting turned OFF (p. 82)?
Rhythm Intro
Not Played/
Rhythm Not
Starting From
Beginning
Is the MIDI TX Part’s PART SWITCH
[RHYTHM] turned on?
• Are the Local Part’s Rhythm and
the MIDI TX Part’s Rhythms syn-
chronized (p. 51)?
Effects Not Ap-
plied/Effects
Sound Wrong
Is a Tone Wheel 1–10 Tone selected?
Effects are applied differently to the
Tone Wheel than they are with other
effects.
• Effects set in MFX/Reverb/Chorus
MFX Source (p. 77) are applied re-
gardless of each Part MFX Switch
ON/OFF setting in the Internal
Part Prm settings (p. 90), or the
MFX setting for each Tone in the
Tone Edit (p. 80).
• When Tone Wheel is selected for
multiple Parts, it is applied to all
the Parts, regardless of whether the
Rx Bender Switch and Rx Hold-1
Switch in the Internal Part Prm set-
tings are ON or OFF (p. 91).
Is MULTI EFFECTS [ON/OFF] set to
OFF (p. 53)?
Is the [CONTROL] knob set to MFX
Control?
• In Edit mode, set the Control set-
ting in MFX/Reverb/Chorus to
MFX CONTROL (p. 77).
Problem
Check/Solution
RD-700_e.book 100 ページ ２００４年４月２６日 月曜日 午前１１時５４分