Filter
Top Products
32
Overview of the RD-700
Overview of the RD-700
Basic Operation of the RD-700
Main Screens
The Tone Screen (Basic Screen)
The names of the Tones currently selected for the Local Parts
are displayed. This is the screen that is ordinarily displayed.
When ONE TOUCH [PIANO] is pressed, setting the RD-700
to the optimal status for piano performances, this screen is
displayed.
You can change the Local Part UPPER1, UPPER2, and
LOWER Tones and tempo.
fig.00-G2
The Tone Wheel Screen
In the Tone screen, when any ORGAN Tone “Tone Wheel 1–
10” is selected for any of the Local Parts, this screen is
displayed when CURSOR [ ] is pressed. The mode when
this screen is displayed is called “Tone Wheel mode,” and
while in this mode you can simulate the creation of sounds
using an organ’s harmonic bars.
Pressing CURSOR [ ] when this screen is displayed
returns you to the Tone screen.
fig.00-G3
The Setup Screen
The currently selected Setup is displayed.
Pressing CURSOR [ ] when the Tone screen or Tone Wheel
Screen is displayed switches the RD-700 to this screen. You
can also have this screen displayed by pressing [SETUP]. You
can change the Setups.
Pressing CURSOR [ ] when this screen is displayed
returns you to the Tone screen or Tone Wheel Screen.
fig.00-G5
The Rhythm/Arpeggio Screen
Pressing CURSOR [ ] when the Tone screen is displayed
switches the RD-700 to this screen.
You can change Rhythm patterns, Arpeggio patterns, and the
tempo.
Pressing CURSOR [ ] when this screen is displayed
returns you to the Tone screen.
fig.00-G4
Special Indications
When the contents of a Setup (p. 54) are changed, an
asterisk (a “*” mark) appears on the right of the
Setup number. If you want to use the changed
content as a new Setup, save the settings to a Setup
(p. 56).
With Clock Source (p. 70) set to MIDI, the tempo
indication changes to “M:” for each screen.
The tempo can be changed with the external MIDI
devices when this mark is indicated.
With EQ Control (p. 70) set to SYSTEM, this mark
appears on the screen.
Equalizer settings do not change when Setups are
switched while this mark is indicated.
With Rhythm Type (p. 82) set to “2,” this mark
appears on the screen.
About the Function Buttons
fig.00-G6
[EDIT]
By pressing [EDIT] to make the indicator light, you can enter
“Edit mode.” In Edit mode you can make detailed settings
for various functions.
You can exit Edit mode by pressing [EDIT], extinguishing its
indicator. When exiting from Edit mode, [EDIT]’s indicator
goes out.
RD-700_e.book 32 ページ ２００４年４月２６日 月曜日 午前１１時５４分