Filter
Top Products
45
Performing with the Keyboard
Performing
Adjust the Volume Level for Individual
Parts (PART SWITCH/LEVEL)
fig.panel
Parts that are played on the RD-700 using the instrument’s internal sound
generator are called Local Parts.
You can use the PART SWITCHes and PART LEVEL sliders to make
individual settings determining whether the sound for each part is played
as well as the volume level for RHYTHM part and Local Parts (LOWER,
UPPER1, and UPPER2).
PART SWITCH
This determines whether or not the sounds in the particular part are played.
When a part’s PART SWITCH indicator is lit (on), the part sounds when the
keyboard is played. The screen Part names are indicated in uppercase
letters.
When a part’s PART SWITCH indicator is not lighted (off), the part does not
sound even when the keyboard is played. The screen Part names are
indicated in lowercase letters.
PART SWITCH will turn on or off each time you press it.
PART LEVEL Slider
Adjusts the volume of an individual Part.
When a part’s PART SWITCH indicator is not lighted, no sound is produced
for the part even when the slider is moved.
CONTROL
PART LEVEL Slider
PART SWITCH
For more on the control of
MIDI TX parts, refer to
“Adjusting the Volume of
Each Part (MIDI TX Part)”
(p. 62).
NOTE
The volume of Parts for
which any Tone Wheel
setting 1–10 is selected
cannot be adjusted with the
PART LEVEL sliders.
Use the VOLUME slider
when adjusting the overall
volume level (p. 25).
RD-700_e.book 45 ページ ２００４年４月２６日 月曜日 午前１１時５４分