Filter
Top Products
79
Detailed Settings for Each Function ([EDIT])
Edit Mode
Chorus Feedback
Sets the level at which the chorus sound is re-input (fed back)
into the chorus. By using feedback, a denser chorus sound
can be created.
Higher values result in a greater feedback level.
Values:
0–127
<Other Prm>, Value
You can make more detailed chorus settings.
When Other Prm is selected, the indication of the
corresponding Value changes, and the value is set.
Refer to
“CHORUS”
(p. 134).
When Chorus/Delay is Set to Delay
Delay-Center
The delay time increases as the value is raised.
Values:
0–1000 (ms), Beat
Delay-Left
This sets the delay time for the delay located at the left side of
the stereo field.
Values:
0–1000 (ms), Beat
Delay-Right
This sets the delay time for the delay located at the right side
of the stereo field.
Values:
0–1000 (ms), Beat
Delay Center, Delay Left and Delay Right can be specified as
note value lengths for a specific tempo. In this case, specify
the value of the desired note.
<Other Prm>, Value
You can make more detailed delay settings.
When Other Prm is selected, the indication of the
corresponding Value changes, and the value is set.
Refer to
“DELAY”
(p. 134).
Making Tone Settings (Tone Edit)
You can make more detailed settings to the tones assigned to
each of the Internal parts.
NOTE
In certain selected Tones, there may be parameters that
cannot be changed.
How to Make Settings
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Editmenu1.eps_150
2.
Press CURSOR [ ]/[ ] to select “4.Tone Edit.”
3.
Press CURSOR [ ] to display the Edit screen.
fig.tone1.eps_150
fig.tone2.eps_150
fig.tone3-1.eps_150
fig.tone1.eps_150
4.
Press CURSOR [ ] or [ ] to switch screens, and press
CURSOR [ ] or [ ] to move the cursor to the
parameter to be set.
5.
Press [INC/YES] or [DEC/NO] to set the value.
6.
When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
RD-700_e.book 79 ページ ２００４年４月２６日 月曜日 午前１１時５４分