Filter
Top Products
10 TASCAM DP-008
Playback and mixing
First, we will play the demo song on the
included SD card. The SD card with the demo
song is shipped already installed but we will
start by explaining how to insert an SD card
here.
Preparing to listen to the demo
song
1 Open the SD card slot cover on the right
side of the unit and insert the supplied
SD card into the slot.
Do not insert the card backwards or
apply unnecessary force. This could
damage the slot or card.
2 Close the slot cover.
3 Open the battery compartment cover
and insert four AA batteries into the
compartment, paying attention to the
plus/minus (+/–) orientation. This unit
can use alkaline or NiMH batteries.
4 Close the battery compartment cover
after installing the batteries.
5 Connect headphones to the PHONES
connector.
Headphones
5 Press and hold the STANDBY/ON key on
the top panel until
TASCAM
appears on
screen.
After starting up the Home Screen
appears on the display.
[Start-Up Screen]
[Home Screen]
CAUTION
Do not remove or insert the SD card •
when the unit’s power is ON. Make sure
the unit power is OFF before you remove
2 – Quick Start Guides