Filter
Top Products
26 TASCAM DP-008
locate to the head of the song (RTZ) or
the last recording start position (LRP).
(See “Return To Zero (RTZ) and Last
Recording Position (LRP)” on page 54.)
g /LRP key
Press this key when the transport is
stopped or playing to fast forward. Press
it again to change the speed from 10x to
50x, again for 100x and 1000x.
If you press this key while holding down
the stop ( ·) key, the transport will locate
to the last recording start position (LRP).
(See “Return To Zero (RTZ) and Last
Recording Position (LRP)” on page 54.)
hPlayback (Á) key
Press this key to start playback. While
pressing the record (–) key, press this key
to start recording. Press this key again
when recording to stop recording and start
playback (punch out).
jREPEAT key
Turns the repeat playback mode on and
off. (See “Repeat playback” on page 55.)
kRecord (–) key and indicator
Press the playback (Á) key while pressing
this key to start recording. The indicator
lights when recording. If you press this
key when any of the track REC indicators
is blinking, or during playback, recording
will begin (punch in). (See “Punching in
and out” on page 52.)
Press the IN/OUT key while pressing and
holding this key to enter auto punch in/out
mode.
lIN/OUT key
Press this key to open the
I/O SETTING
screen, and to set IN (starting) and OUT
(ending) points for repeat playback and
track editing. (See “Setting IN and OUT
points” on page 55.)
Press this key while pressing and holding
the recording (–) key to enter auto punch
in/out mode.
Front panel
; MIC A/B
These are built-in omnidirectional
microphones. They can be set as input
sources for INPUT A/B (
Internal MIC/
Low
or
Internal MIC/High
).
3 – Names and Functions of Parts