Filter
Top Products
TASCAM DP-008 77
9 Use the computer to copy track files
from the WAVE directory on the FAT
partition to the computer.
10 After exporting track files to the
computer, disconnect the unit from the
computer using the proper procedures
and then remove the USB cable (see
“Disconnecting” on page 72).
Exporting a stereo master
track
You can export a stereo master track that you
have made on the unit (see “Mastering” on
page 48) to a computer. When you create a
new stereo master track for a song, the existing
stereo master track is overwritten, so if you
want to keep multiple different stereo master
tracks, you might want to save them to a
computer.
Before starting the following export
procedures, make sure that the song that you
want to export a stereo master track for is
currently loaded and that you have already
created a stereo master track for it.
1 When the recorder is stopped, press the
MENU key to open the
MENU
screen.
2 Turn the DATA wheel to select
IMPORT/
EXPORT
, and press the F4 (¥) key to open
the
IMPORT/EXPORT
menu.
3 Turn the DATA wheel to select
EXPORT
MASTER
, and press the F4 (¥) key.
The default file name is displayed and can
be edited.
NOTE
If there is no stereo master track, an error
message appears.
4 Use the
Ô/
keys, the DATA wheel
and the F3 and F4 keys to edit the name
of the stereo master file being exported
(See “Editing names” on page 37).
5 After setting the name, press the F2
(
EXEC
) key.
A stereo master track file is exported as
a 16-bit, 44.1-kHz, stereo WAV file to
the FAT partition. The file name of the
exported file is the name set in step 3
above plus the “.WAV” extension.
If you have previously exported a stereo
master track with the same name, a
confirmation message (
Duplicate name
- Are you sure?
) appears.
Press the F3 (
YES
) key to overwrite the
older track.
NOTE
To cancel exporting, press the F1 (BACK) key.
6 Press the HOME key to return to the
Home Screen.
7 Connect this unit to a computer using
the USB cable (see “Connecting with a
computer” on page 71).
8 Use the computer to copy the stereo
master file from the WAVE directory
on the FAT partition of the unit to the
computer.
9 After copying finishes, disconnect the
unit from the computer using the proper
procedures and then remove the USB
cable (see “Disconnecting” on page 72).
11 – Exchanging Data with a Computer