Filter
Top Products
46 TASCAM DP-008
Set the track EQ using the
EQ SETTING
screen.
1 Press the EQ key to open the
EQ SETTING
screen.
2 Set the track EQ (equalizer).
The track equalizer has the following
parameters.
Parameter Setting value
EQ-SWITCH
(track EQ
switch)
ON/OFF
(Default: OFF)
Hi-F
(high frequency
range)
1.7 kHz – 18 kHz
(Default: 5 kHz)
Hi-G
(high range
gain)
±12 dB
(Default: 0.0 dB)
Lo-F
(low frequency
range)
32 Hz – 1.6 kHz
(Default: 350 Hz)
Lo-G
(low range
gain)
±12 dB
(Default: 0.0 dB)
Use the F1 (˙) and F2 (¥) keys to switch
tracks.
Use the F3 (§) and F4 (¶) keys to select
parameters.
Use the DATA wheel to adjust the
parameters.
3 After making the track EQ settings,
press the HOME key to return to the
Home Screen.
NOTE
When track EQ is ON for a track, the track is
shown on the Home Screen as in the illus-
tration below.
Track EQ is ON
Reverb
This unit has six types of reverb effects.
Adjust the level of the signal sent to the reverb
effect from each track by using their REVERB
knobs.
The signals are sent to the reverb effect after
track EQ (equalizer) is applied.
1 Press the REVERB key to open the
REVERB
SETTING
screen.
2 Adjust the reverb settings for the
following parameters.
Parameter Setting value
TYPE
Hall 1/Hall 2/Room/
Studio/Plate 1/Plate 2
(Default: Hall 1)
6 – Basic Recording