Filter
Top Products
16 TASCAM DP-008
OL indicator
When you play the guitar, the input level is
shown by the
A
(INPUT A) and
1
(TRACK 1)
meters on the display.
Turn up the TRACK 1 LEVEL and MASTER
LEVEL knobs and the VOLUME dial to hear the
guitar sound through headphones. When doing
so, the
L
and
R
meters on the right side of the
display become active.
NOTE
You can use the TRACK 1 PAN knob to •
adjust the stereo position of the signal
when monitoring.
The input signal cannot be monitored if •
the REC indicator of the TRACK 1 that it is
assigned to is not lit.
Recording guitar to TRACK 1
1 Press the playback (Á) key while
pressing and holding the record (–) key
to start recording. The TRACK 1 REC key
stops blinking and stays lit constantly.
TRACK 1 REC indicator
You are recording. Play your guitar!
2 When you are finished, press the stop
(ª) key to stop recording.
3 Press the TRACK 1 REC key again. Its
light turns off.
Listening to your recording
1 To go to the beginning of the song, press
the Ô key while pressing and holding
the stop (ª) key. (This is the Return To
Zero (RTZ) function)
2 Press the playback (Á) key to play the
recorded track.
3 Use the TRACK 1 LEVEL knob and the
MASTER LEVEL knob to adjust the
playback level. Use the VOLUME dial to
adjust the final monitoring volume.
2 – Quick Start Guides