Filter
Top Products
TASCAM DP-008 11
or insert the card. If you remove or insert
the SD card when the unit’s power is
on, the unit cannot shut down properly
and all unsaved data and settings will be
lost. These data and settings cannot be
recovered.
Do not remove the batteries or •
disconnect the power cable while the
unit power is ON.
The included alkaline batteries are for •
confirming operation of the unit and
might not last very long.
Before turning the power ON, completely •
turn down the volume of headphones
and monitoring systems connected to the
unit.
TIP
This unit can also be powered by a •
PS-P520 power adaptor (sold separately)
(see “Connecting an AC adaptor (sold
separately)” on page 32).
You can monitor recordings using •
speakers by connecting an amplifier or
powered speakers to the LINE OUT jacks.
Playing and mixing the demo
song
Before the unit is shipped, a demo song is
stored on its SD card. We are now going to use
basic playback and mixing features with this
demo song.
1 Press the HOME key to open the Home
Screen.
2 When the Home Screen is open, press the
MENU key to open the
MENU
screen.
3 Use the DATA wheel to select the
SONG
menu, and press the F4 (¥) key to open
the
SONG
menu screen.
4 Rotate the DATA wheel to select
LOAD
, and
press the F4 (¥) key to open the
SONG
LOAD
screen that shows a list of songs.
2 – Quick Start Guides