Filter
Top Products
TASCAM DP-008 17
TIP
Use the TRACK 1 PAN knob to set the stereo
position of the track signal.
Record guitar to TRACK 2
Now, you will record lead guitar on TRACK 2
while listening to the rhythm guitar on TRACK
1. Use the following procedures to change the
recording source for TRACK 2.
1 Press the ASSIGN key to open the
INPUT
ASSIGN
screen.
Set which input (INPUT A or INPUT
B) is to be the recording source for each
track. In the initial setting, INPUT A (
A
)
is assigned as the recording source for
tracks 1, 3, 5 and 7, and INPUT B (
B
)
is assigned as the recording source for
tracks 2, 4, 6 and 8.
2 Press the TRACK 2 REC key to set the
TRACK 2 SOURCE
to
A
.
3 Press the HOME key to return to the
Home Screen.
4 Press the TRACK 2 REC key. The key
blinks showing that the track is in record
standby.
When you play the guitar, the input
level is shown by the
A
(INPUT A) and
2
(TRACK 2) meters on the display.
2 – Quick Start Guides