1-6
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Enable flow control on the
Ethernet port
flow-control
Required
By default, flow control is not
enabled on a port.
Configuring Access Port Attribute
Follow these steps to configure access port attribute:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the link type for the
port as access
port link-type access
By default, the link type for the
port is access.
Add the current access port into
the specified VLAN
port access vlan vlan-id
Optional
Configuring Hybrid Port Attribute
Follow these steps to configure hybrid port attribute:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the link type for the port as
hybrid
port link-type hybrid
Required
Set the default VLAN ID for the
hybrid port
port hybrid pvid vlan vlan-id
Optional
By default, the VLAN of a
hybrid port is VLAN 1.
Add the current hybrid port into
the specified VLAN
port hybrid vlan vlan-id-list
{ tagged | untagged }
Optional
For a hybrid port, you can
configure to tag the packets of
specific VLANs, based on
which the packets of those
VLANs can be processed in
differently ways.
Configuring Trunk Port Attribute
Follow these steps to configure trunk port attribute:
