1-9
To do… Use the command… Remarks
Configure the destination IP
address
destination-ip ip-address
Required
You can configure an IP
address or a host name.
By default, no destination
address is configured.
Configure dns-server
dns-server ip-address
Required when you use the
destination-ip command to
configure the destination
address as the host name.
By default, no IP address of the
DNS server is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the test type
test-type http
Required
By default, the test type is
ICMP.
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
tos value
Optional
By default, the service type is
zero.
Configure the type of HTTP
operation
http-operation { get | post }
Optional
By default, the type of HTTP
operation is get, that is, the
HTTP operation will get data
from the HTTP server.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command
in any view.
