1-14
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group
and enter its view
hwping administrator-name
operation- tag
Required
By default, no test group is
configured.
Configure the destination
address
destination-ip ip-address
Required
This IP address and the one
configured on the HWPing
server for listening service must
be the same.
By default, no destination
address is configured.
Configure the destination port
destination-port
port-number
z Required in a Udpprivate
test
z A Udppublic test is a UDP
connection test on port 7.
Use the hwping-server
udpecho ip-address 7
command on the server to
configure the listening
service port; otherwise the
test will fail. No port number
needs to be configured on
the client; any destination
port number configured on
the client will not take effect.
z By default, no destination
port number is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the source port
source-port port-number
Optional
By default, no source port is
specified.
Configure the test type
test-type { udpprivate |
udppublic }
Required
By default, the test type is
ICMP.
Configure the number of
probes per test
count times
Optional
By default, one probe is made
per test.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Configure the data packet size
datasize size
Optional
By default, the data packet size
is 100 bytes.
