4-1
4 Device Management
Introduction to Device Management
Device Management includes the following:
z Reboot the device
z Configure real-time monitoring of the running status of the system
z Specify the main configuration file to be used at the next reboot
Device Management Configuration
Device Management Configuration Tasks
Complete the following tasks to configure device management:
Task Remarks
Rebooting the Device Optional
Scheduling a Reboot on the Device Optional
Configuring Real-time Monitoring of the Running Status of the System Optional
Specifying the Main Configuration File to be Used at Next Reboot Optional
Identifying and Diagnosing Pluggable Transceivers Optional
Rebooting the Device
You can perform the following operation in user view when the device is faulty or needs to be rebooted.
Before rebooting, the system checks whether there is any configuration change. If yes, it prompts
whether or not to proceed. This prevents the system from losing the configurations in case of shutting
down the system without saving the configurations.
Follow the step below to reboot the device:
To do… Use the command… Remarks
Reboot the device reboot [ unit unit-id ] Available in user view
