1-40
Configuring Digest Snooping
Configure the digest snooping feature on a device to enable it to communicate with other devices
adopting proprietary protocols to calculate configuration digests in the same MST region through
MSTIs.
Configuration prerequisites
The device to be configured is connected to a device of another vendor adopting a proprietary spanning
tree protocol. MSTP and the network operate normally.
Configuration procedure
Follow these steps to configure digest snooping:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Enable the digest snooping
feature
stp config-digest-snooping
Required
The digest snooping feature is
disabled on a port by default.
Return to system view
quit
—
Enable the digest snooping
feature globally
stp config-digest-snooping
Required
The digest snooping feature is
disabled globally by default.
Display the current
configuration
display current-configuration
You can execute this command
in any view.
