1-7
To do… Use the command… Remarks
Configure the source
interface
source-interface
interface-type
interface-number
Required
You can only configure a VLAN
interface as the source interface.
By default, no source interface is
configured.
Configure the test type
test-type dhcp
Required
By default, the test type is ICMP.
Configure the number of
probes per test
count times
Optional
By default, each test makes one
probe.
Configure the maximum
number of history records
that can be saved
history-records number
Optional
By default, the maximum number is
50.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in three
seconds.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in
any view.
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group
and enter its view
hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the destination IP
address
destination-ip ip-address
Required
By default, no destination address
is configured.
Configure the source IP
address
source-ip ip-address
Required
By default, no source IP address
is configured.
Configure the source port
source-port port-number
Optional
By default, no source port is
configured.
Configure the test type
test-type ftp
Required
By default, the test type is ICMP.
