A SERVICE OF

logo

1-13
[device] vlan 100
# Configure the default VLAN ID of GigabitEthernet 1/0/1 as 100.
[device-GigabitEthernet1/0/1] port trunk pvid vlan 100
Troubleshooting Ethernet Port Configuration
Symptom: Default VLAN ID configuration failed.
Solution: Take the following steps.
z Use the display interface or display port command to check if the port is a trunk port or a hybrid
port. If not, configure it as a trunk port or a hybrid port.
z Configure the default VLAN ID.