1-5
HWPing server configuration
The following table describes the configuration on HWPing server, which is the same for HWPing test
types that need to configure HWPing server.
Follow these steps to configure the HWPing server:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing server
function
hwping-server enable
Required
Disabled by default.
Configure a UDP listening
service
hwping-server udpecho
ip-address port-num
Required for UDP and jitter
tests
By default, no UDP listening
service is configured.
Configure a TCP listening
service
hwping-server tcpconnect
ip-address port-num
Required for TCP tests
By default, no TCP listening
service is configured.
HWPing Client Configuration
HWPing client configuration
After HWPing client is enabled, you can create multiple test groups for different tests, without the need
to enable HWPing client repeatedly for each test group.
Different types of HWPing tests are somewhat different in parameters and parameter ranges. The
following text describes the configuration on HWPing client for different test types.
1) Configuring ICMP test on HWPing client
Follow these steps to configure ICMP test on HWPing client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group
and enter its view
hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the destination IP
address
destination-ip ip-address
Required
By default, no destination
address is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the test type
test-type icmp
Optional
By default, the test type is
ICMP.
