Filter
Top Products
32
VR800 Owner’s Manual (Handling Programs)
1 (Turn on the power)
2
3
5, 6, 7
4
Handling Programs
1. Turn on the power to the VR800 and a connected
SCSI drive.
2. Insert a formatted disk into the SCSI drive.
The VR800 will display [Initial..], [(SCSI drive name and
ID number)], [(Recording mode, such as [ADAC 8ch])],
then the top of ABS time base (ABS 0).
The current program is [PGM 01]. [#0001] is the default
name of PGM 01.
This chapter explains how to handle Programs. It covers the following topics:
1. Creating a new Program
2. Using a Program Change function
3. Deleting a Program
4. Editing a Program title
Creating a new Program
You can manage individual songs by setting multiple programs on the disk as explained in the “Managing songs
by program change function” section of the “Before Starting” chapter. Up to 99 programs can be created as long
as disk space is available. When you format a disk, one program will be automatically created. Follow the steps
below to create a new program (in addition to the Program created on the disk during the format operation).
6. Press the EXECUTE/YES key again.
A default title (#0002) appears on the display, with [#]
and [SURE?] flashing. This means that you can enter a
name for the new program.
If you wish to name the program, continue the steps below.
In either case, you can change the title later, as explained
in “Editing a program title.”
5. Press the EXECUTE/YES key.
The VR800 will automatically enter [Title Edit ?] menu in
SETUP mode. You can enter a title for program 2. ([t] and
[?]flash alternately.)
If you prefer the default name, press the EXIT/NO key.
4. Turn the JOG dial clockwise.
The question marks “?” of [New PGM ?] and [SURE?] flash.
This indication asks you if you wish to set a new program
(program 2).
3. While holding down the HOLD/> key, press the
STORE key.
[Select PGM] appears on the display briefly, then changes
to a flashing “01” ([#0001 of PGM 01) and [SURE?] flash.
([#0001] is the default name of PGM 01.)
SHIFT P.EDIT
LOC MEM
RECORD
STOP
PLAY REW F FWD
AUTO PUNCH
CLIPBOARD
AUTO RTN
OUTIN
ENDOUTINSTART
EJECT
ACCESS
5678
OL
24
12
6
0
1234
RECORD TRACK
4321 5
678
EXECUTE
/ YES
EXIT
/ NO
DISP SEL
UNDO / REDO
EDITHOLD/
STORE
SETUP
JOG
VARI PITCH SCRUBLOCATEAUTO PLAY
PGM SEL
AUTO RTN
TIME BASE SEL
SHUTTLE
LOCATE REC END
LOCATE ABS 0
CLIPBOARD PLAY
PUNCH
AUTO
OPTICAL
A SYNC
PREVIEW
8
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SMF
PGM
ABS
44.1kHz
DIGITAL
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SURE ?
DIGITAL
44.1kHz
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
?
SURE
44.1kHz
DIGITAL
44.1kHz
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
PGM
DIGITAL