Filter
Top Products
44
VR800 Owner’s Manual (Recording to a Metronome Sound)
2, 7, 14
Checking the metronome sound
1. Select the BAR/BEAT/CLK time base using the TIME
BASE SEL key.
2. Start playback from the beginning of the Program.
Even if the selected Program does not have any recorded
data, track 8 outputs the metronome sound and the
VR800 counts time.
3. Adjust the system so the sound output from track
8 can be monitored with the mixer.
You will hear the metronome sound output from track 8
using the Tempo Map created earlier.
4. After confirming the metronome sound, stop the
recorder section and return to the top Program.
Starting recording
10. Hold down the RECORD button and press the
PLAY button to start recording.
The READY track will go to the input monitor mode just
as when the recording level was adjusted. The time the
level that was actually adjusted with the mixer will be
recorded.
11. Play the musical instrument in time with the
metronome.
Adjusting monitor/record level of the
musical instrument
5. Press the RECORD TRACK select key of the track
to record the musical instrument on, and then put
that track in the READY mode.
6. Press the RECORD button.
The lamp of the RECORD button will flash and the READY
track will go to the input monitor mode.
7. Press the PLAY button and playback the Program
from the top.
Only the READY track will go to the input monitor mode
(recording does not take place), and all other tracks will
be in the reproduction monitor mode, therefore track 8
plays back the metronome sound.
Quitting recording
12. Press the STOP button to stop the recorder.
Checking the recorded sound
13. Turn OFF the ready track RECORD TRACK select
key .
14. Locate the top of the Program and start playback.
Adjust and monitor the track playback sound recorded
on the mixer. Since the metronome function still remains
ON at this time, you can hear the metronome sound
during playback of the recorded sounds when you turn
up the track 8 monitor volume.
8. Play the musical instrument in time with the
metronome and adjust the recording level of the
track to be recorded on the mixer.
9. After adjusting the recording level, stop the
recorder and return to the top of the Program.
6
10
3, 8 11
1
4, 12
SCENE MEMORYREC BUSS
EFF EDITSELECTED EQ
EQ/HI
EQ/HI-MIDEQ/LO-MIDEQ/LOSETUP
CURRENT SCENE STATUS
KEY MODE
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
+10
0
-10
-20
-30
-40
-
GAIN
FREQ
PAN
Q
PAN
ON ON ON ON ON ON ON
SOLO SOLO SOLO SOLO SOLO SOLO SOLO
EQ EDIT
EQ EDIT EQ EDIT
EQ EDIT EQ EDIT
EQ EDIT EQ EDIT
EQ EDIT
SOLO
ON ON
SOLO
EQ LIBRARY
STORERECALL
EQ ON
EFF LIBRARY
STORERECALL
EFF2EFF1
STORERECALLSOLO
+1/ /-1
DATA
EXIT
ENTER
FREQ
QFREQ
Q
FREQ Q
GAINGAINGAIN
1-8 ANALOG IN 9-16 ADAT IN 17-20 EFF RTN
PAGE SELECT
SYSTEM MIDI
PHASE GROUP
ROUTING/ PAIR/
CH VIEW
METER
CHANNEL/
+10
0
-10
-20
-30
-40
-
0
-10
-20
-30
-60
-
-40
MMC SEND
PANPA NPA NPA NPA NPA N
-40
-36
-24
-18
-12
-9
-6
-3
OL
ST BUSS/SOLO
LR
METER
SHIFT P.EDIT
LOC MEM
RECORD
STOP
PLAY REW F FWD
AUTO PUNCH
CLIPBOARD
AUTO RTN
OUTIN
ENDOUTINSTART
EJECT
ACCESS
5678
OL
24
12
6
0
1234
RECORD TRACK
4321 5
678
EXECUTE
/ YES
EXIT
/ NO
DISP SEL
UNDO / REDO
EDITHOLD/
STORE
SETUP
JOG
VARI PITCH SCRUBLOCATEAUTO PLAY
PGM SEL
AUTO RTN
TIME BASE SEL
SHUTTLE
LOCATE REC END
LOCATE ABS 0
CLIPBOARD PLAY
PUNCH
AUTO
OPTICAL
A SYNC
PREVIEW
5, 13
Music Instrument