Filter
Top Products
114
Chapter 4 Recording and Saving the Performance
Changing the Order of Songs on Floppy
Disk
Here’s how you can change the order of songs saved on a floppy disk.
1. Have ready an empty, formatted floppy disk.
2. Insert the floppy disk containing the saved songs into the
disk drive.
3. Press the [Song/Disk] button.
4. Use the touch screen or Page < > and < > to select the
song to which you would like to assign song number one.
5. After you’ve chosen a song, touch <Exit> several times.
Display the screen where the measure number appears in the top-right area
of the screen.
6. Press the Play [ ] button.
The measure number on the screen appears in reverse video.
7. When the measure number display returns to its original
appearance, press the Stop [ ] button.
8. Take the floppy disk out of the disk drive.
9. Insert a blank floppy disk.
10. Save the song in the usual way (p. 109).
Repeat these steps to save the song you want to have song number 2, the
song you want to have song number 3, and so on to the blank floppy disk in
the desired song sequence.
For more about formatting,
take a look at “Formatting
Floppy Disks (Format)” (p.
109).
NOTE
The measure number of the
screen appears in reverse
video while the KF-90
reads the song data from
floppy disk. Don’t take the
floppy disk out of the drive
until the display returns to
its original state.
NOTE
Some commercially
available music files cannot
b
e saved because they are
copyrighted.