Filter
Top Products
13
Panel Descriptions
■ Rear Panel
1 [Power] Switch
Pressed to switch the power on and off (p. 17).
2 AC Inlet
Used only the supplied power cable (p. 16).
3 Pedal Jacks
Connect the supplied pedal (DP-6) and others (p. 16).
When connected to Damper, the pedal functions as a damper
pedal.
When connected to Sostenuto, the pedal functions as a
sostenuto pedal.
When connected to Soft, the pedal functions as a soft pedal.
4 MIDI Out/In Connectors
Connect between these and external MIDI instruments to
exchange performance information (p. 156).
5 Computer
Computer Switch
Switches the connections for the MIDI connectors and the
computer port (p. 161).
Also, this switch is set to Mac, PC-1, or PC-2 according to the
type computer that's connected.
Computer Connector
You can connect a computer to this jack to exchange
performance information (p. 161).
* You can't use the MIDI Out/In connector and the Computer
connector at the same time.
6 Mic
Volume Knob
Adjusts the volume level for the microphone (p. 18).
Mic In Jack
Used for connecting microphones (p. 18).
7 Line In Jacks
You can connect audio equipment or other digital
instruments and hear them through the KF-90's speakers
(p. 160).
8 Line Out Jacks
You can use these to play the notes from the KF-90 on an
audio device or record what you play on a tape recorder
(p. 160).
1 2 3 4 5 6 7 8