Filter
Top Products
96
Chapter 3 Some Handy Features
■ Specifying the Part to Display
You can display a different Part of the model song.
1. At the Keyboard screen or the Graph screen, touch
<Options>.
fig.03-22.e_70
2. Touch to switch the Part that’s displayed.
The upper display can show two parts simultaneously.
When the power is turned on, this is set to display the “Lower Track” and
“Upper Track” simultaneously, but you may select parts 1–16 as necessary.
When <Keyboard> is selected in the Lower Screen, the keyboard
performance appears.
After recording your performance, if you want to compare it with the model
performance again, all you have to do is to choose the part where you
recorded your performance.
3. When you’re done making the settings, touch <Exit>.
You are returned to the previous screen.
Setting Value
Lower Screen Keyboard, Whole Track, Parts 1–16, OFF
Upper Screen (Left) Lower Track, Parts 1–16, OFF
Upper Screen (Right) Upper Track, Parts 1–16, OFF
For more information
about Parts, refer to
“Multitrack Recording with
16 Parts (16-Track
Sequencer)” (p. 118).