Filter
Top Products
126
Various Settings
■ Assigning Functions to Pedals
and Performance Pads (Pedal
Setting/User Functions)
You can assign a variety of functions to the left and center
pedals and the performance pads. You can call up the
assigned functions just by pressing the corresponding pedal
or pad.
925
NOTE
Use only the specified expression pedal (EV-7/5; sold
separately). By connecting any other expression pedals, you risk
causing malfunction and/or damage to the unit.
❍ Assigning Functions to Pedals
At Step 3 of “Procedure” (p. 132), touch <Pedal Setting>.
fig.d-pedalset.eps_50
Touch <▲><▼> to assign functions to each of the pedals.
Pressing the One Touch Program [Piano] button restores the
piano performance functions to the pedals (p. 16).
❍ Assigning Functions to Performance Pads
1. Press the [User Function] button and watch the
indicator light up.
A screen like the one shown below appears.
2. Touch <▲><▼> to assign functions to each of the
Performance Pads.
If you set the pedal as a dedicated switch for selecting User
Programs, the function assigned to the pedal cannot be used.
Refer to “Using the Pedal to Switch User Programs” (p. 97).
❍ Functions that Can be Assigned (Pedals,
Performance Pads)
Function Explanation
Leading
Bass
Toggles the Leading Bass function* on or
off. The function stays on as long as the
pedal to which this is assigned is pressed.
When assigned to a Performance Pad, this
is alternately switched on and off each time
the pad is pressed.
No Chord
Only the Rhythm part is played. After No
Chord is switched on, specifying a chord
by playing the actual keys cancels the func-
tion, and all of the accompaniment parts
are played.
Break
During the performance of Automatic Ac-
companiment, the accompaniment stops
for one measure only.
Fill In to
Variation
Performs the same function as the Fill In
[To Variation] button (p. 46).
Fill In to
Original
Performs the same function as the Fill In
[To Original] button (p. 46).
Fill In
A fill-in is inserted, but the accompaniment
pattern after that doesn’t change.
Half Fill In to
Variation
This plays a fill-in half a measure long,
then switches to the Variation accompani-
ment pattern.
Half Fill In to
Original
This plays a fill-in half a measure long,
then switches to the Original accompani-
ment pattern.
Original/
Variation
This changes the accompaniment pattern
without inserting a fill-in.
Arranger
Reset
When this function is used during Auto-
matic Accompaniment, the accompani-
ment returns to the beginning of the
Division (p. 35).
Intro 1/
Ending 1
Performs the same function as the [Intro/
Ending] button (p. 43). Intro 1 and Ending
1 are played.
Intro 2/
Ending 2
Performs the same function as the [Intro/
Ending] button (p. 43). Intro 2 and Ending
2 are played.
Arranger
Start/Stop
Performs the same function as the [Start/
Stop] button (p. 43).
Orchestra-
tor Up
This changes the accompaniment to a more
elavorate arrangement (p. 48).
Orchestra-
tor Down
Changes the accompaniment to a simpler
arrangement (p. 48).
Melody
Intelligence
Turns the Melody Intelligence function on
and off (p. 49).
KR105.book Page 126 Tuesday, June 7, 2005 5:25 PM