Roland KR105 Musical Instrument User Manual


 
148
Connecting External Devices
Connecting to Audio
Equipment
When you connect the KR105 to audio equipment, you can
play the sounds from the KR105 through the speakers on the
audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use audio cables (sold separately)
with standard phone plugs.
Connectors
fig.09-
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the KR105 through the
speakers on the connected equipment, or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
Input Jacks
You can connect another sound source, such as audio
equipment or an electronic instrument, using audio cables
(sold separately). Play the sounds from the connected device
through the speakers on the KR105.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
* You cannot use the KR105 to adjust the volume of the
connected sound generating device.
926a
* When connection cables with resistors are used, the volume
level of equipment connected to the inputs jacks may be low. If
this happens, use connection cables that do not contain
resistors, such as those from the Roland PCS series.
Making the Connections
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the KR105 Through the
Speakers on Audio Equipment or Recording Your
Performances on a Recording Device
fig.09-
1. Turn the volume all the way down on the KR105 and
on the device youre about to connect.
2. Turn off the power to the KR105 and other connected
equipment.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the KR105.
5. Switch on the connected device.
6. Adjust the volume level on the KR105 and the
connected device.
Recording KR105 Performances on a Recording Device
7. Start recording with the connected device.
8. Play the keyboard.
9. When the performance ends, stop recording on the
connected equipment.
Input R/L
(Line In, Aux In)
Pedal
KR105
KR105.book Page 148 Tuesday, June 7, 2005 5:25 PM