Roland VG-99 Music Pedal User Manual


 
113
COSM GUITAR Chapter 9 Parameters Guide
Chapter 9
FILTER BASS SOLO
Parameter/
Range
Explanation
FILTER CUTOFF
0–100
Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The
sound gets brighter (harder) as the value is
raised.
FILTER RESO (Filter Resonance)
0–100
Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch Sensitivity)
0–100
This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.
FILTER DECAY
0–100
This sets the speed at which the filter stops.
The speed increases as the value of the set-
ting is reduced.
* The decay effect cannot be obtained if the
TOUCH SENS value is too low.
COLOR
0–100
Adjusts the strength of the low range. As the
value is increased, the low range will be-
come stronger.
Parameter/
Range
Explanation
FILTER CUTOFF
0–100
Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The
sound gets brighter (harder) as the value is
raised.
FILTER RESO (Filter Resonance)
0–100
Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch
Sensitivity)
0–100
This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.
COLOR
0–100
Adjusts the amount of harmonics in the
sound when the guitar strings are played
with greater force. The harmonic compo-
nents become more prominent as the value
is raised.
To make adjustment easier, set FILTER
CUTOFF to 100 and FILTER RESO and
TOUCH SENS to 0, then gradually
increase the FILTER RESO setting as
you play the guitar.
SUSTAIN
0–100
Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
VG-99_e.book 113 ページ 2007年7月5日 木曜日 午前9時22分