Filter
Top Products
94
Chapter 8 Other Functions
When storing Favorite Settings, you can also give the settings names.
Carry out the following procedure in Step 2 of
“Saving to the
Favorite Settings”
(p. 93).
1.
Press [F5] (NAME).
The Name edit screen appears.
2.
Press PAGE [ ] [ ] to move the cursor to
the position with the character you want to
enter.
3.
Select the character with the PATCH/VALUE
dial.
As you continue to rotate the PATCH/VALUE dial, the
character guide automatically switches from uppercase letters
to lowercase letters, numerals, and symbols.
You can carry out the following operations by pressing [F1]–
[F5].
4.
Repeat Steps 2 and 3 to complete the Favorite
Setting name.
5.
When you have finished editing the name,
press [EXIT].
The Favorite Settings save screen returns to the display.
6.
Press [F6] (WRITE); the settings are saved.
7.
Press [EXIT] several times to return to the Play
screen.
Here is an example using the compressor effect.
1.
Press [FX].
2.
Press PAGE [ ] to go to Page 1.
3.
Press [F1] (COMP).
The number and name of the currently selected Favorite
Settings are displayed.
If not using the Favorite Settings, proceed to Step 4.
4.
Press [F6] (EDIT).
5.
Press PAGE [ ] to display the last page (in
this case, Page 3).
6.
Use [F1] (SELECT) or the F1 knob to select
FAVORITE WRITE.
7.
Rotate F2 (SELECT) to select the Favorite
Settings you want to search for.
8.
Press [F3] (SEARCH).
A list of patches using the selected Favorite Setting is displayed.
Naming Favorite Settings
(FAVORITE NAME)
Buttons
Functions
[F1] (INSERT)
Inserts a blank space at the cursor position.
[F2] (DELETE)
Deletes the character and shifts the follow-
ing characters to the left.
[F3] (SPACE)
Enters a blank space at the cursor position.
[F4] (A0!)
Switches between letters, numerals, and
symbols.
[F5] (A<=>a)
Switches between uppercase and lowercase
letters.
Searching for Patches That Use
the Same Favorite Settings
VG-99_e.book 94 ページ ２００７年７月５日 木曜日 午前９時２２分