Filter
Top Products
97
Chapter 8 Other Functions
Chapter 8
1.
Press [SYSTEM].
2.
Press PAGE [ ] [ ] to go to Page 2.
3.
Press [F3] (V-LINK).
The V-LINK screen appears.
4.
Press [F1] (CLIP).
The PATCH/CLIP screen appears.
5.
Use [F1] and [F2] or the F1 or F2 knobs to set
the palette and clip for V-LINK Channel A; set
the palette and clip for V-LINK Channel B with
[F4] and [F5] or the F4 or F5 knobs.
6.
Press [EXIT] to return to the V-LINK screen.
7.
Press [F4] (STR CH) to select the channel to be
controlled with each string.
Some V-LINK compatible models such as the EDIROL
DV-7PR allow only Channel A to be used.
Note messages output with the V-LINK function are
affected by the parameters set in
“Playing an External
Synthesizer Sound Module (GUITAR TO MIDI)”
(p. 64)
as well as the STRING CH settings.
8.
Press [EXIT] to return to the V-LINK screen.
9.
Press [F2] (ASGN1) or [F3] (ASGN2) to select
Assign 1 or Assign 2.
10.
Use [F1] (SELECT) or the F1 knob to set the
source to be used in operating the target.
11.
Use [F2] (SELECT) or the F2 knob to set the
target.
For more on the source and target parameters, refer to
“V-LINK
PATCH”
(p. 174).
12.
Rotate the F3 knob to set the minimum value
for the TARGET parameter’s control range.
13.
Rotate the F4 knob to set the maximum value
for the TARGET parameter’s control range.
14.
Press [EXIT] several times to return to the Play
screen.
Setting V-LINK
Parameter
Available
Setting
V-LINK
Function
Transmitted
MIDI Messages
PALETTE
OFF, 1–32 Changing the
palette.
CC00 (Bank Select):
00H–1FH
CLIP OFF, 1–32 Changing the
clip.
Program Change:
00H–1FH
STRING CH
1st–6th
Explanation
OFF
No channel is controlled.
A CH Channel A of the V-LINK compatible device is
controlled.
B CH Channel B of the V-LINK compatible device is
controlled.
C CH MIDI Note plug-in is controlled.
VG-99_e.book 97 ページ ２００７年７月５日 木曜日 午前９時２２分