Filter
Top Products
121
FX (Effects) Chapter 9 Parameters Guide
Chapter 9
*1
Setting available when TYPE is set to CUSTOM.
OCT FUZZ This models an ACETONE FUZZ.
MUFF FUZZ This models an Electro-Harmonix Big Muff
π
.
CUSTOM Custom OD/DS
DRIVE
0–120
Adjusts the depth of distortion.
BOTTOM
-50–+50
Adjusts the tone for the low frequency
range. Turning this to the left (counterclock-
wise) produces a sound with the low end
cut; turning it to the right boosts the low end
in the sound.
TONE
-50–+50
Adjusts the tone.
EFFECT LEVEL
0–100
Adjusts the volume of the overdrive/distor-
tion sound.
DIRECT LEVEL
0–100
Adjusts the volume of the direct sound.
Parameter/
Range
Explanation
Parameter/
Range
Explanation
CUSTOM *1
TYPE
This selects the basic sound when the TYPE parameter is set to
CUSTOM.
OD-1 This is the sound of the BOSS OD-1.
OD-2 OD-2 This is a overdrive sound with high
gain.
CRUNCH This is a crunch sound.
DS-1 This gives a basic, traditional distortion
sound.
DS-2 This creates a heavier distortion sound.
METAL1 This is a metal sound with a characteristic
midrange.
METAL2 This gives a heavy metal sound.
FUZZ This gives a basic, traditional fuzz sound.
BOTTOM
-50–+50
This controls the input sound’s low-fre-
quency range and adjusts the amount of dis-
tortion in the low-frequency range.
TOP
-50–+50
This controls the input sound’s low-fre-
quency range and adjusts the amount of dis-
tortion in the high-frequency range.
LOW
-50–+50 Adjusts the low-range tones after distortion
is applied.
HIGH
-50–+50
Adjusts the high-range tones after distortion
is applied.
VG-99_e.book 121 ページ ２００７年７月５日 木曜日 午前９時２２分