Filter
Top Products
114
Chapter 9 Parameters Guide COSM GUITAR
PWM
CRYSTL
ORGAN
BRASS
Parameter/
Range
Explanation
FILTER CUTOFF
0–100
Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The sound
gets brighter (harder) as the value is raised.
FILTER RESO (Filter Resonance)
0–100
Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch
Sensitivity)
0–100
This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.
PWM DEPTH
0–100
This sets the depth to which the waveform’s
pulse width is varied. Higher values result
in deeper undulations.
PWM RATE
0–100
This sets the speed at which the filter stops.
The speed increases as the value of the set-
ting is reduced.
SUSTAIN
0–100
Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
Parameter/
Range
Explanation
ATTACK LENGTH
0–100 This sets the decay time for the attack por-
tion of the sound. A smaller setting results
in a shorter attack.
MOD TUNE (Modulation Tune)
0–100 This sets the tuning for the modulation ap-
plied to the attack.
MOD DEPTH (Modulation Depth)
0–100
This sets the depth of the modulation ap-
plied to the attack. Larger values result in
deeper undulations.
ATTACK LEVEL
0–100
This sets the volume level of the attack portion.
BODY LEVEL
0–100 This sets the volume level for the sustained
portion of the sound.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
Parameter/
Range
Explanation
FEET 16’
0–100
This is a Long Tone one octave lower than
the guitar.
FEET 8’
0–100
This is a Long Tone at the same pitch as the guitar.
FEET 4’
0–100
This is a Long Tone one octave higher than
the guitar.
SUSTAIN
0–100
Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
Parameter/
Range
Explanation
FILTER CUTOFF
0–100
Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The
sound gets brighter (harder) as the value is
raised.
FILTER RESO (Filter Resonance)
0–100
Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.
TOUCH SENS (Touch
Sensitivity)
0–100
This sets the sensitivity when the filter is
shifted according to the picking. The shift-
ing of the filter caused by the picking in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.
SUSTAIN
0–100 Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.
VG-99_e.book 114 ページ ２００７年７月５日 木曜日 午前９時２２分