Filter
Top Products
168
Chapter 9 Parameter Guide SYSTEM
Parameters That Can Be
Assigned to Separate Controllers
CTL1-4, FC-300 EXP SW1/EXP SW2,
FC-300 CTL1, 2, 4, 6, 8
FC-300 EXP3/CTL3, EXP4/CTL5, EXP5/CTL7
GK S1, S2
GK VOL, EXP PEDAL, FC-300 EXP1/EXP2
Parameter
Explanation
Parameters for which
✔
is indicated can be assigned to the control-
lers shown here.
OFF No function is assigned.
✔
✔ ✔ ✔
ASSIGNABLE
(PATCH)
Functions according to the
Control Assign settings in each
individual patch.
✔
✔ ✔ ✔
PATCH LEVEL
0–100
Provides control of the patch
level.
✔
✔
PATCH LEVEL
0–200
✔
✔
AB BALANCE
Provides control of the balance
of the volume in Channel A
and Channel B.
✔
✔
FOOT VOLUME
[A&B]
Provides simultaneous control
of the foot volume in Channel
A and Channel B.
✔
✔
FOOT VOLUME
[A]
Provides control of the foot
volume in Channel A or Chan-
nel B.
✔ ✔
FOOT VOLUME
[B]
✔
✔
WAH Provides control of the pedal
wah when the pedal wah is
switched on.
✔ ✔
GUITAR
VOLUME [A&B]
Provides simultaneous control
of the COSM guitar volume in
Channel A and Channel B.
✔ ✔
GUITAR
VOLUME [A]
Provides control of the COSM
guitar volume in Channel A or
Channel B.
✔ ✔
GUITAR
VOLUME [B]
✔ ✔
GUITAR TONE
[A&B]
Provides simultaneous control
of the COSM guitar tone in
Channel A and Channel B.
✔ ✔
GUITAR TONE
[A]
Provides control of the COSM
guitar tone in Channel A or
Channel B.
✔ ✔
GUITAR TONE
[B]
✔
✔
MIXER LEVEL
[A&B]
Provides simultaneous control
of the mixer volume level in
Channel A and Channel B.
✔ ✔
MIXER LEVEL
[A]
Provides control of the mixer
volume level in Channel A or
Channel B.
✔ ✔
MIXER LEVEL
[B]
✔
✔
PATCH SEL
DEC/INC
When set to INC, patch num-
bers increase when patches are
switched; setting this to DEC
causes the VG-99 to switch to
lower patch numbers when
patches are switched.
✔
PU SEL [A&B]
Allows you to switch the pick-
ups in Channel A and Channel
B simultaneously.
✔
PU SEL [A]
Allows you to switch the pick-
ups in Channel A or Channel B.
✔
PU SEL [B]
✔
S1:TUNER/
S2:BPM TAP
The TUNER screen is switched
with S1. S2 can be used for tap
input of the BPM parameter.
✔
PATCH LEVEL
DEC/INC
Provides control of the patch
level.
✔
AB BALANCE
toA/toB
Provides control of the volume
balance between Channel A
and Channel B. The level from
Channel A is increased with
S1; the level from Channel B is
increased with S2.
✔
MIDI START/
STOP
Transmits Start and Stop for
transmission of MIDI Realtime
messages.
✔
✔ ✔
MMC PLAY/
STOP
Transmits Play and Stop for
transmission of MIDI Machine
Control.
✔
✔ ✔
FC-300
AMP CTL 1/2
Provides control of the FC-
300’s AMP CONTROL1 and
AMP CONTROL2 jacks. This
allows switching of the chan-
nels for guitar amps connected
to these jacks.
✔
PATCH SELECT
INC
Switches to higher patch num-
bers when patches are
switched.
✔ ✔
PATCH SELECT
DEC
Switches to lower patch num-
bers when patches are
switched.
✔ ✔
PU SEL
toFRONT [A&B]
Switches the Channel A and
Channel B pickups towards the
front.
✔ ✔
PU SEL toREAR
[A&B]
Switches the Channel A and
Channel B pickups towards the
rear.
✔
✔
PU SEL toFRONT
[A]
Switches the Channel A pickup
towards the front.
✔
✔
PU SEL toREAR
[A]
Switches the Channel A pickup
towards the rear.
✔ ✔
PU SEL toFRONT
[B]
Switches the Channel B pickup
towards the front.
✔ ✔
PU SEL toREAR
[B]
Switches the Channel B pickup
towards the rear.
✔
✔
TUNER ON/OFF
Switches the TUNER screen.
✔
✔
BPM TAP
Allow tap input for the BPM
parameter.
✔
✔
PATCH LEVEL
INC
Increases the patch level.
✔
✔
CTL1-4, FC-300 EXP SW1/EXP SW2,
FC-300 CTL1, 2, 4, 6, 8
FC-300 EXP3/CTL3, EXP4/CTL5, EXP5/CTL7
GK S1, S2
GK VOL, EXP PEDAL, FC-300 EXP1/EXP2
Parameter
Explanation
VG-99_e.book 168 ページ ２００７年７月５日 木曜日 午前９時２２分