Filter
Top Products
12 – MMC and MIDI functions–Program Change messages
TASCAM 788 Digital PortaStudio 105
Program Change messages
The 788 can receive MIDI Program Change mes-
sages to change the effect settings (“Effects” on
page 81), the routing patterns stored in a library
(“Routing libraries” on page 91) or scenes (“Scene
libraries” on page 92).
It cannot transmit Program Change messages.
NOTE
Scene memories cannot be changed while the transport is
moving. The transport must be stopped for these Program
Change messages to have any effect.
MIDI Bank Select messages are used to distinguish
between preset and user libraries.
The MIDI channel number is used to determine what
setting will be changed on receipt of a Program
Change message.
Note that channel dynamic processors 1 through 7-8
are controlled through MIDI channels 1 through 7
(channel 7 handles the dynamics processor for chan-
nels 7-8).
If two channels are linked as a stereo pair, MIDI Pro-
gram Change messages for either channel of the pair
will affect the effect assigned to the pair.
Enabling/disabling Program Change
You can enable or disable the way that the 788
responds to Program Change, as explained here.
The 788 can be set to respond to Program Change
messages for the mixer (channels 15 and 16), for the
effects (1 through 12), both, or neither.
1 With the transport stopped, press the
MENU
key.
2 Use the dial to scroll down to the
SYNC/
MIDI
menu and press ENTER.
3 Use the dial to scroll down to the
CONTROL
menu item and press
ENTER.
4 There are two tabs on this screen. Use the Á
key to ensure that the
PC/CC tab is visible.
5 Use the § and ¶ keys to highlight the
PGMCHG SCN (Program Change for
scenes and routing tables) or the
PGMCHG
EFF
(Program Change for effects) menu
item.
6 Use the dial to turn the appropriate parameter
ON or OFF.
Effects
MIDI ch. Target Range
1-7 Channel dynamics bank0(preset):0-**,
bank1(user):0-127
9 Stereo dynamics bank0(preset):0-**,
bank1(user):0-127
10 Stereo effect1 bank0(preset):0-**,
bank1(user):0-127
11 Stereo effect2 bank0(preset):0-**,
bank1(user):0-127
12 Multi effect bank0(preset):0-**,
bank1(user):0-127
Mixer
15 Routing Library 0-127
16 Scene memory 0-9