Filter
Top Products
Part VI Sound
102
QQTG0701
Sound
Part Setting
Set the various sound attributes for each part.
Selecting an attribute
1.
On the SOUND MENU display, select PART
SETTING.
2.
Use the PART SELECT
∧
and
∨
buttons to
select the part.
3.
Use the buttons below the display to adjust
each attribute (explained in detail following).
• The settings display is comprised of 5 pages. Use the
PAGE buttons to switch pages.
4.
When you have completed adjusting all of the
settings for one part, select another part and
repeat the adjustment procedure as desired.
• The settings and effects of the PAN, EFFECT etc. may
differ depending on the sound.
<PAGE 1>
SOUND:
Use the SOUND
∧
and
∨
buttons to select a
sound.
• The buttons on the control panel may also be used to
select a sound.
VOLUME:
Use the VOL
∧
and
∨
buttons to adjust the vol-
ume (0 to 127).
PAN:
Use the PAN
∧
and
∨
buttons to adjust the ste-
reo balance (L64–CENTER(CTR)–R63).
• At L64, the sound is completely to the left, at R63 com-
pletely to the right. At CENTER, the sound is at the cen-
ter. The display indicates the selected position.
• Even at the same numerical value, the stereo balance
may differ slightly depending on the sound.
SUS PEDAL:
Use the SUSTAIN
∧
and
∨
buttons to adjust the
length of the sustain (1-8). Use the ON/OFF but-
tons to enable or disable the sustain effect, when
the sustain pedal is depressed.
KEY SHIFT:
Use the KEY
∧
and
∨
buttons to specify the
amount of key shift (−24 to +24).
• A value of 1 means a shift of one semi-tone. To raise (or
lower) the pitch one octave, set the value to +12 (or −12).
•The
∨
button is used to lower the pitch, and the
∧
button
to raise the pitch.
TUNING:
Use the TUNE
∧
and
∨
buttons to adjust the fine
tuning (−128 to +127).
•The
∨
button is used to lower the pitch, and the
∧
button
to raise the pitch.
<PAGE 2>
REVERB DEPTH:
Use the REVERB
∧
and
∨
buttons to adjust the
depth of the REVERB (0 to 127).
DIGITAL EFFECT:
Use the DIG. EFFECT ON/OFF buttons to set
the DIGITAL EFFECT to on or off.
CHORUS:
Use the CHORUS ON/OFF button to set the
CHORUS to on or off. Use the
∧
and
∨
buttons
to adjust the depth of the effect (0 to 127).
MULTI:
Use the MULTI ON/OFF button to set the MULTI
EFFECT to on or off. Use the
∧
and
∨
buttons to
adjust the depth of the effect (0 to 127).
<PAGE 3>
11_Part VI.fm 102 ページ ２００３年５月１９日 月曜日 午後１時４４分